The low profile mount is compatible with LED, LCD, and Plasma TVs and other flat panel displays measuring between 32 and 55 inches. Supports all VESA mounting standards up to 600x400 and many odd size mounting patterns (mounting holes on the rear of the TV or panel should be no more than 24" inches horizontally and up to 16.1" vertically). The over 6 lbs sturdy steel construction offers up to 100 lbs loading capacity. Convenient quick-release tabs on both mounting brackets stay hidden, and easily pull down to unlock the TV from the wall plate for cable access while its low-profile design places the TV nearly flush to the wall for a clean appearance. The 27.4" wide wall plate will support two stud installation for studs up to 24-Inch apart (most US homes have studs which are 16-Inch apart). This mount is VideoSecu brand, please report to Amazon if you receive a mount without VideoSecu logo.
The APTMM2 flat tilt mount features a slim 1.4-Inch profile from the wall to the back of your display. Additionally it has 0-15 degrees of tilt. The APTMM2 mount is constructed with 8LBS of 100% High Grade Steel providing a sturdy and reliable mount. The APTMM2's solid wall plate allows for quick and easy installation and will support a wide variety of stud applications up to 28-Inch apart. The APTMM2 mount will fit the majority of LCD and Plasma Displays up to 65-Inch. Most LCD and Plasma displays 65-Inch and smaller conforms to the VESA Standards and this mount will support most odd sized hole patterns that do not conform to the VESA Standards. For more information on what exact hole patterns this mount will fit please see the Hole Pattern Coverage in specifications section.
This is a very substantial mount with Dual arms and heavy gauge steel. The arms extend over 20" from the wall yet fold to less than 4.25". Even at full extension, this mount has very little sag or twist. It is rated for up to 165lbs and most displays 65" and smaller weigh under 100lbs. The unit has dual tilt adjustment knobs and it will tilt forward or back 15 degrees. The wall plate is 27.5" wide and has wide slots making it easy to mount into standard 16" studs even if they are not exactly 16" apart. The universal design will fit any display with a hole pattern up to 26.3" wide and 17" tall. The wall plate is 1/8" thick and very stable and includes large center hole for cable pass-though into the wall. This mount will swivel approximately 180 degrees depending on the size of your display. Dual TV safety screws are included to prevent accidental liftoff of the display. Installation instructions and hardware included. This mount also includes a 10' 1.4 HDMI Cable included. Capable of 3D signal, Audio Return, and Ethernet. This is a upgraded cable and similar cables sell for $15-$25
This VideoSecu ultra slim TV mount is new design that perfect for LED TV. The ultra-thin mount provides loading capacity up to 110lbs. Supports all VESA mounting standards up to 800x800mm(200x200, 300x200, 300x300, 400x200, 400x300, 400x400, 500x200, 500x300, 500x400, 500x500, 600x200, 600x300, 600x400, 600x500, 600x600, 700x200, 700x300, 700x400, 700x500, 700x600, 700x700, 800x200, 800x300, 800x400, 800x500, 800x600, 800x700, 800x800). With a 14.5mm distance between the back of the TV and the wall, this is one of the slimmest mounting solutions available! Featuring high quality mounting hardware and a "kick-stand" style lever to hold the TV away from the wall while connecting and disconnecting cables, this mount has a unique design that's both visually appealing as well as functional. The adjustable cable make the mount install to studs separation up to 28". It works for concrete and solid block wall. This mount is VideoSecu brand, please report to Amazon if you receive a mount without VideoSecu logo.
The VideoSecu MP501B is compatible with LED, LCD, and Plasma TVs and other flat panel display between 32 and 60 inches weigh less than 165lbs. Supports all VESA mounting standards up to 710x450mm and many odd size mounting patterns (mounting holes on the rear of the TV or panel should be no more than 28" apart horizontally and up to 17.7" vertically). Over 12 lbs solid heavy-gauge steel construction offers a smooth surface, high-tech look while providing strength and durability. Viewing angle can be adjusted by tilt 0-15 degree forward. TV is positioned just 2.2" profile from the wall for a clean, low-profile appearance. Lift and lock safety system secure the display in position as needed. How to ensure the mount compliance with your selected display? First, the weight of your display should be less than 165lbs. Second, mounting holes distance on the rear of TV must be less than 28" (710mm) horizontally and 17.7" (450mm) vertically. Last, the mount plate width is 30". Your TV should be at least 30 inch wide. Otherwise, you will see the bracket. Note: VideoSecu brand mount, please report to Amazon.com if you receive a mount without VideoSecu logo.
Adjustable Extended Arm Swivel & Tilt Wall Mount for LCD, LED & Plasma TV
Features:
- Scratch resistant & durable steel construction in black finish
- 3 way adjustable swivel, tilt & extended arm mount
- Adjust angle to view from any seating position in the room
- Compatible with LCD, LED & Plasma HDTV with VESA mounting holes up to 400x400mm
- Great for saving surface space by mounting to the wall
- Built-in bubble level to ensure precise level mount
- Two main parts allows for easy and fast set-up
- Mounting hardware for concrete and solid block included
Specifications:
- VESA Hole Pattern: up to 420mm x 410mm (16.54"x 16.14")
- Swivel Range: up to 180°
- Tilt Range: up to 10° Downward
- Arm Extension: 95mm to 575mm (3.74" To 22.64")
- Wall Plate Dimensions: 100mm Length x 245mm Height (3.94"x 9.65")
- TV Plate Dimensions: 457mm x 203mm (18"x 8")
- Maximum weight capacity: 45kg / 99lbs
- Color: Black
This mount is intended to be installed onto a concrete or brick mounting surface. If you are planning on mounting to a wooden stud, we recommend contacting a professional installer as this mount does NOT include the necessary hardware for mounting to a wooden stud.
Tilt/Swivel Wall Mount Bracket for LCD TV/Monitor
Mount your LCD monitors and flat panels easily with this VESA Standard Swivel Tilt Wall Mount Bracket. This wall mount is designed to hold LCD, Plasma and Flat Panels
with 75mm or 100mm VESA mounting pattern. Low-profile design and adjustable joints allow an easy viewing in a variety of angles. Ideal space saver, folds flat to the
wall.
Features:
Great for saving surface space by mounting your LCD or monitor on the wall
Fits flat panel and LCD monitors with VESA mounting standard: 3" x 3" (75 x 75mm) or 4" x 4" (100 x 100mm)
Supports up to 33 lbs / 15 kgs
Tilt: -45º ~ +45º
Swivel: 180º
TV to Wall: 55~75mm
Assembly instructions and parts included for installation
- Fits most displays between 23" and 42"
- Max VESA: 400x200
- Tilt: 0 ~ 10 degree down.
- Only a 46mm (1.81") gap between the tv and the wall when folded flat.
- Max Weight: 75kgs (165 lbs)
Getting an adjustable wall mount that would allow you to have the optimum viewing angle usually meant settling for a bulky mount that protruded several inches from the wall. Our Ultra-Slim Tilting mount gives you the convenience of being able to tilt your display up to 10 degrees down yet has a gap of less than 2 inches when folded flat. Built-in bubble level makes it alignment a breeze.
- Solid steel construction.
- Universal, adjustable mounting system.
- Built-in leveling bubble.
- Wall Plate Dimensions: 18" w x 8" h x 1" d.
- Wall Plate: 18" x 8"
Adjustable Extended Arm Swivel & Tilt Wall Mount for LCD, LED & Plasma TV
Features:
- Scratch resistant & durable steel construction in black finish
- 3 way adjustable swivel, tilt & extended arm mount
- Adjust angle to view from any seating position in the room
- Compatible with LCD, LED & Plasma HDTV with VESA mounting holes up to 400x200mm
- Great for saving surface space by mounting to the wall
- Built-in bubble level to ensure precise level mount
- Two main parts allows for easy and fast set-up
- Mounting hardware for concrete and solid block included
Specifications:
- VESA Hole Pattern: up to 400mm x 200mm (15.75"x 7.87")
- Swivel Range: up to 180°
- Tilt Range: up to 10° Downward
- Arm Extension: 95mm to 575mm (3.74" To 22.64")
- Wall Plate Dimensions: 100mm Length x 245mm Height (3.94"x 9.65")
- TV Plate Dimensions: 457mm x 203mm (18"x 8")
- Maximum weight capacity: 40kg / 88lbs
- Color: Black
***This mount is intended to be installed onto a concrete or brick mounting surface. If you are planning on mounting to a wooden stud, we recommend contacting a professional installer as this mount does NOT include the necessary hardware for mounting to a wooden stud.
Features: - UNIVERSAL TV MOUNT CAN WORK WITH TV SIZES: 32" - 60" - TILTS 12 DEGREES -MAX LOAD: 60 KGS /132 LBS - Profile TV TO WALL: 50MM/2" -Product Size: 29.53" X 17" X 2" (750x430x50mm) -Bubble level included - The color is black - Unit weight 6 lbs - Assembly hardware & instructions included - Max VESA:600x400mm
Top Search
Last Search
