Found 1375 50 In Flat Screens Hdtvs HDTVs Products.
The VideoSecu MP501B is compatible with LED, LCD, and Plasma TVs and other flat panel display between 32 and 60 inches weigh less than 165lbs. Supports all VESA mounting standards up to 710x450mm and many odd size mounting patterns (mounting holes on the rear of the TV or panel should be no more than 28" apart horizontally and up to 17.7" vertically). Over 12 lbs solid heavy-gauge steel construction offers a smooth surface, high-tech look while providing strength and durability. Viewing angle can be adjusted by tilt 0-15 degree forward. TV is positioned just 2.2" profile from the wall for a clean, low-profile appearance. Lift and lock safety system secure the display in position as needed. How to ensure the mount compliance with your selected display? First, the weight of your display should be less than 165lbs. Second, mounting holes distance on the rear of TV must be less than 28" (710mm) horizontally and 17.7" (450mm) vertically. Last, the mount plate width is 30". Your TV should be at least 30 inch wide. Otherwise, you will see the bracket. Note: VideoSecu brand mount, please report to Amazon.com if you receive a mount without VideoSecu logo.
This is a very substantial mount with Dual arms and heavy gauge steel. The arms extend over 20" from the wall yet fold to less than 4.25". Even at full extension, this mount has very little sag or twist. It is rated for up to 165lbs and most displays 65" and smaller weigh under 100lbs. The unit has dual tilt adjustment knobs and it will tilt forward or back 15 degrees. The wall plate is 27.5" wide and has wide slots making it easy to mount into standard 16" studs even if they are not exactly 16" apart. The universal design will fit any display with a hole pattern up to 26.3" wide and 17" tall. The wall plate is 1/8" thick and very stable and includes large center hole for cable pass-though into the wall. This mount will swivel approximately 180 degrees depending on the size of your display. Dual TV safety screws are included to prevent accidental liftoff of the display. Installation instructions and hardware included. This mount also includes a 10' 1.4 HDMI Cable included. Capable of 3D signal, Audio Return, and Ethernet. This is a upgraded cable and similar cables sell for $15-$25
The APTMM2 flat tilt mount features a slim 1.4-Inch profile from the wall to the back of your display. Additionally it has 0-15 degrees of tilt. The APTMM2 mount is constructed with 8LBS of 100% High Grade Steel providing a sturdy and reliable mount. The APTMM2's solid wall plate allows for quick and easy installation and will support a wide variety of stud applications up to 28-Inch apart. The APTMM2 mount will fit the majority of LCD and Plasma Displays up to 65-Inch. Most LCD and Plasma displays 65-Inch and smaller conforms to the VESA Standards and this mount will support most odd sized hole patterns that do not conform to the VESA Standards. For more information on what exact hole patterns this mount will fit please see the Hole Pattern Coverage in specifications section.
This heavy duty steel mount fits most 32" to 60" Plasma TV or LCD monitor. This Universal Flat Panel Mount offers quality, versatility and security for 32" to 60" Flat panel televisions. It features a high capacity and low profile design and adjustable tilt for optimal viewing. Will This mount Fit my Plasma TV? First check the weight of your TV. It must be less than 165 lbs. Second, look at the back panel of your TV. If your TV has 4 holes or 6 holes on the back of the screen, measure the vertical and horizontal distance between the holes. If the vertical distance is within 2.95 inch to 17.7 inch, horizontal distance within 28 inch, then this bracket will fit. If you currently have a stand attached to your LCD TV this is usually removed prior to fitting the wall mount. Third, the width of your TV should be 32" or above. Otherwise the mount is too wide to hide behind your TV. VideoSecu TV wall mount. Report to Amazon if received counterfeit mount not in VideoSecu box.
The low profile mount is compatible with LED, LCD, and Plasma TVs and other flat panel displays measuring between 32 and 55 inches. Supports all VESA mounting standards up to 600x400 and many odd size mounting patterns (mounting holes on the rear of the TV or panel should be no more than 24" inches horizontally and up to 16.1" vertically). The over 6 lbs sturdy steel construction offers up to 100 lbs loading capacity. Convenient quick-release tabs on both mounting brackets stay hidden, and easily pull down to unlock the TV from the wall plate for cable access while its low-profile design places the TV nearly flush to the wall for a clean appearance. The 27.4" wide wall plate will support two stud installation for studs up to 24-Inch apart (most US homes have studs which are 16-Inch apart). This mount is VideoSecu brand, please report to Amazon if you receive a mount without VideoSecu logo.
You know what it is you enjoy. You get into sports, fast-action and entertainment that's displayed in life like resolution. With a 600Hz refresh rate and HD picture quality, the 50PT350 takes that enjoyment and boosts it to new levels.
The VideoSecu MW52B Tilt Wall Mount provides a versatile and secure solution for all environments, such as home, boardroom, hotel and stadium. The mount arm could tilt in 2 ways; tilt up and down 15 degrees.
This mount is compatible with most mid to large size TVs, fit from VESA 100x100 up to 660x460. It's the perfect solution for most 30" to 55" flat panel displays, and affordably priced to fit your budget. If you are not sure if this mount fits your display, please contact us, we will check for you.
Think you need to break your budget to enjoy blockbuster HD entertainment? Not with Toshiba's 55" class LCD HDTV G310 series. Featuring all-new designs, these value-packed televisions look great and work great in a living room, kitchen or bedroom. Watch your favorite movies and programming in 1080p full HD. Savor fast-action sports or edge-of-your-seat gaming clearly thanks to our exclusive CineSpeed Panel or Clear Frame 120 Hz technology. General Information--Manufacturer--Toshiba::General Information--Manufacturer Part Number--55G310U::General Information- General Information--Brand Name--Toshiba::General Information--Product Series--G310::General Information--Product Model--55G310U::General Information--Product Name--55G310U LCD TV::General Information--Product Type--LCD TV::Miscellaneous--Package Contents- 55G310U LCD TV Remote Control :Warranty--Standard Warranty--1 Year Limited::Technical Information--Screen Size--55"::Technical Information--Backlight Technology--CCFL::Technical Information--Aspect Ratio--16:9::Technical Information--Features--Channel Labeling, Sleep Timer::Technical Information--Media Player--Yes::Video--Digital Tuner--ATSC::Video--Analog Tuner--NTSC::Video--Video Signal Standard--HDTV 1080p::Video--Standard Refresh Rate--60 Hz::Video--Frame Refresh Rate--120 Hz::Video--Maximum Resolution--1920 x 1080::Video--Scan Format--1080p::Audio--Speakers--Yes::Audio--RMS Output Power--14 W::Interfaces/Ports--Number of HDMI Ports--3::Interfaces/Ports--Composite Video--Yes::Interfaces/Ports--Component Video--Yes::Interfaces/Ports--HDMI--Yes::Interfaces/Ports--USB--Yes::Interfaces/Ports--VGA--Yes::Physical Characteristics--VESA Mount Standard--400 x 400::Physical Characteristics--Height--33.5"::Physical Characteristics--Width--52.3"::Physical Characteristics--Depth--4.1"::Physical Characteristics--Height with Stand--36.28"::Physical Characteristics--Width with Stand--52.28":
Get a true cinematic experience without going to the cinema with a Samsung plasma HDTV. This Samsung PN50C450, with Mega Dynamic Contrast Ratio makes sure every frame is saturated with dense, rich color. Samsung is also ENERGY STAR compliant so you are assured that your 50 -inch plasma HDTV is helping the environment by using less enery while saving you money.
This low-profile tilt mount MF607B is designed for most midsize to large size flat-panel TVs weighing up to 165 lbs. VESA compliant for simple installation, supports TV with mounting hole patterns up to 26" horizontally, and 16" vertically (VESA 660X400mm). Adjustable forward tilts to provide comfortable viewing when the TV is mounted above eye level or to reduce screen glare. Perfect choice for mount your flat-panel TV on a wall, with stylish appearance, and it makes TV viewing so much better. This commercial grade sturdy and reliable mount come with wide wall plate, it will support two stud installations for studs up to 24" apart. Open wall plate for electrical access. Common wall and TV attachment hardware are included in the box. Promotion: Free HDMI cable and Magnetic Bubble Leveler shipped with this tilt TV mount, start from Jun 29th, 2011. Make sure you get VideoSecu brand TV wall mount. Report to Amazon if received counterfeit or knock off mount not packed in VideoSecu color box.
Top Search
Last Search
