Found 5779 32 Hdtvs HDTVs Products.
Features:Durable Black finish. High weight capacity, 132 lbs. Professinal flat panel TV mount / bracket. Easy installation, installation manual and fitting screws and bolts included. Tilt adjustment, viewing angle can be set up to -15 degrees (panel tilted down / forward). Compatible with LED, LCD, Plasma TVs and other flat panel displays measuring between 32" and 60".Specification: 1. Supportable Display Size: fits 99+% of TVs for 32"-60"2. Load Capacity: 132 lbs (60KG) 3. Material: 2.0mm SPCC (Cold Plate Steel) 4. Tilt: 15¡ãof downward tilt5. TV to Wall: Low profile less than 2" from the wall6. Max Hole Distance: 725mm X 480mm (28.5" x 18.9")7. Supports VESA standards up to 600mm X400mm8. Compliant to VESA standard 75/100/200/400/600/7009. Double Stud Installation10. All installation hardware included11. Size: Wall Panel: Length-78cm(30.7"), Width-22cm(8.7")Hook: Length-51cm(20")Important:1. Please install this TV mount / bracket on Firm / Solid / Strong wall. 2. If the LED, LCD, Plasma TVs and other flat panel displays size is up to 60", but the Max Hole Distance is within 725mm X 480mm, and the weight is within 132 lbs (60KG), this TV mount / bracket also works perfect for you. 3. When we refer to VESA sizes we are referring to the standard used to measure the hole pattern on the back of your display. If you do know know your VESA pattern you can simply measure the distance side to side and top to bottom on your display. The distance in millimeters is the VESA Hole Pattern. Installation hardware: (1) Rubber Blanket(2) Plum Flower Gasket(3) Plum Flower Gasket (4) Metallic Gasket(5) Metallic Gasket(6) Screw M5x12(7) Screw M8x12(8) Screw M6x12(9) Screw M5x30(10) Screw M6x30(11) Screw M8x30(12) Swell Plastic Button(13) Tapping Screw
The APTMM2 flat tilt mount features a slim 1.4-Inch profile from the wall to the back of your display. Additionally it has 0-15 degrees of tilt. The APTMM2 mount is constructed with 8LBS of 100% High Grade Steel providing a sturdy and reliable mount. The APTMM2's solid wall plate allows for quick and easy installation and will support a wide variety of stud applications up to 28-Inch apart. The APTMM2 mount will fit the majority of LCD and Plasma Displays up to 65-Inch. Most LCD and Plasma displays 65-Inch and smaller conforms to the VESA Standards and this mount will support most odd sized hole patterns that do not conform to the VESA Standards. For more information on what exact hole patterns this mount will fit please see the Hole Pattern Coverage in specifications section.
High-Definition LCD TV with 720p ultra sharp widescreen HD picture with integrated slot-loading DVD player - Playable Disc: DVD-VIDEO, CD-R/RW, DVD-R/RW
If you been hearing about how amazing Blu-ray entertainment is, or how much better your favorite shows would look in HD, you've heard right. The thing is, you need 1080p Full HD to get the most out of both. With the 42LK450, you can.
The slim 1.9 inch profile tilt mount MF408B designed for majority of 23" to 37" LCD LED Plasma flat panel display with mounting hole pattern within 18.1" horizontal and 14.2" vertical included 200x100, 200x200, 300x100, 300x200, 300x300, 400x100, 400x200, 400x300mm. Over 6 lbs of high quality steel construction offers a smooth surface, durability while provide study loading to displays weighing less than 165lbs. 0-15° of forward tilt for viewing angle adjustment. The mount features an open wall plate design that provides ample room for cable routing. Two security screws provide security and lock the display in position as needed. The 20" length wall plate can be mounted to two studs up to 16" apart.
Features and Benefits:
- Low-profile design
- Open design for easy cable access
- Built-in bubble level
- Security screws lock the display in position
- Tilt feature for viewing angle adjustment
Will This mount Fit my Plasma TV?
First, check the weight of your TV. It must be less than 165 lbs.
Second, look at the back panel of your TV. If your TV has 4 holes or 6 holes on the back of the screen, measure the vertical and horizontal distance between the holes, if the vertical distance is within 14", horizontal distance within 18", then this bracket will fit.
Third, the width of your TV should be 20" above. Otherwise the mount is too wide to hide behind your TV.
Dual Extended Arm Tilting/Swiveling Wall Mount Bracket For HDTV 32"-63"
Features:
Extends from 135 to 630mm (24.8") from the wall
Folds back to only 130mm (5") from the wall
Swivels left and right at wall, elbow and faceplate
Solid toughened steel construction
Scratch resistant and durable steel construction in black finish
Assembly instructions and parts included for installation
Fits most: 32" to 63" flat panels, LCD, plasma screens
Supports up to 165 lbs / 75 kgs.
Ultra-slim design
Easy installation
Mounting hardware included
Compatibility:
Will fit most flat panel plasma and LCD TVs with mounting patterns up to VESA 600x400
Maximum weight capacity: 75kg / 165lbs.
Dimensions:
Max. hole pattern 765mm wide and 480mm high
Range of Motion:
Tilt: -15 to +15 degree up and down
Swivel: 180 degree side to side
Extension from wall: 135 to 630mm (24.8")
NOTE:
This mounting bracket is not compatible with certain Pioneer®, Sharp® and LG® brand TVs. Specifically; the following models are not compatible:
Pioneer: PDP-6100HD, PRO-1410HD, PDP-614MX, PDP-6070HD, PRO-1540HD, PDP-607CMX
Sharp: LC-65D93U, LC-65D90U, LC-57D90U, LC-65D64U
LG: 52LG70
Features: - UNIVERSAL TV MOUNT CAN WORK WITH TV SIZES: 32" - 60" - TILTS 12 DEGREES -MAX LOAD: 60 KGS /132 LBS - Profile TV TO WALL: 50MM/2" -Product Size: 29.53" X 17" X 2" (750x430x50mm) -Bubble level included - The color is black - Unit weight 6 lbs - Assembly hardware & instructions included - Max VESA:600x400mm
The 42LV5500 delivers LED picture quality that along with a whole lot more. You can tap directly into instant entertainment with Smart TV and with TruMotion 120Hz refresh rate sports and faction movies never looked better.
The flexible aluminum alloy swing LCD wall mount supports LCD flat screens with VESA 75x75(3"x3") or 100x100(4"x4"). Constructed with 3 lbs of high grade aluminum alloy material, the ML10B mount provides up to 33lbs loading capacity. Designed with two-link arm, it's easy to get good viewing position by the 180 tilt, left and right swivel and max 14" extension from wall. Its classic black finish elegantly complements offices, conference rooms, merchandising displays, hotel rooms or any room in the home. This mount is VideoSecu brand. Please report to Amazon if you receive a mount without VideoSecu logo.
This VideoSecu new Full Motion mount is a breakthrough in swing arm mount design, combining strength, easy installation, and striking product design that is unparalleled in the industry. They take maneuverability, stability and security to the extreme with a unique look that is sure to match your flat panel. This LCD Wall mount folds flat against the wall or extends out up to 20". The mount is for single stud mounting, fit VESA 200x100/200x200, Maximum Load: 55lbs. Cable management on arm. Please check carefully before purchase
Top Search
Last Search
